What is Sm@rt Client and Why You Need It
If you are looking for a way to remotely operate and observe your SIMATIC HMI systems over Industrial Ethernet/WLAN, then you need Sm@rt Client. Sm@rt Client is a software solution that allows you to access the display and functions of your SIMATIC HMI devices from your Windows PC or Android smartphone/tablet. With Sm@rt Client, you can monitor and control your industrial processes from anywhere, anytime, and with any device.
Sm@rt Client works in combination with WinCC Sm@rt Server, which is an option for SIMATIC HMI Basic Panels 2nd, Comfort Panels, and WinCC Runtime Advanced. WinCC Sm@rt Server enables an operation station to make its display available to the Sm@rt Client app. The station takes on the role of a Sm@rt Server, while the PC or mobile device takes on the role of a Sm@rt Client. You can use Sm@rt Client in view only mode, where you can only see the display of the operation station, or in coordinated operation mode, where you can also interact with the display and switch the right of operation between the station and the app.
sm@rt client download
Sm@rt Client offers many benefits for SIMATIC HMI users, such as:
Increased flexibility and mobility: You can access your SIMATIC HMI systems from anywhere within the network range, without being tied to a fixed location.
Improved efficiency and productivity: You can perform tasks faster and easier with your preferred device, without having to walk to the operation station or use a separate remote control.
Enhanced safety and security: You can monitor and control your industrial processes from a safe distance, without exposing yourself or others to potential hazards. You can also protect your data with encryption and authentication features.
How to Download Sm@rt Client for Windows
If you want to use Sm@rt Client on your Windows PC, you need to download the Sm@rtClient.exe file from the Siemens website. Here are the requirements and steps for downloading it:
Make sure you have a valid Siemens account and an Export Policy check release. You can register for a Siemens account [here](^6^). You can request an Export Policy check release [here].
Go to the [download page](^6^) for WinCC Sm@rtServer on the Siemens website.
Select the version of WinCC Sm@rtServer that matches your SIMATIC HMI device.
Click on "Download" and follow the instructions to save the file on your PC.
Extract the file and run the setup.exe file to install WinCC Sm@rtServer on your PC.
After installation, you will find the Sm@rtClient.exe file in the folder C:\Program Files (x86)\Siemens\WinCC\SmartServer\SmartClient.
Double-click on the file to launch Sm@rt Client on your PC.
How to Download Sm@rt Client for Android
If you want to use Sm@rt Client on your Android smartphone or tablet, you need to download the Sm@rt Client app from the Google Play Store. Here are the requirements and steps for downloading it:
Make sure your Android device meets the minimum system requirements: Android 4.4 or higher, 1 GB RAM or more, and 100 MB free storage space or more.
Go to the [Google Play Store] on your device and search for "Sm@rt Client".
Select the app with the Siemens logo and tap on "Install".
Wait for the app to download and install on your device.
Open the app and grant the necessary permissions for accessing your device's camera, microphone, and storage.
You are now ready to use Sm@rt Client on your Android device.
How to Use Sm@rt Client with WinCC Sm@rt Server
To use Sm@rt Client, you need to connect it to a WinCC Sm@rt Server that is running on a SIMATIC HMI device. WinCC Sm@rt Server is an option that allows an operation station to make its display available to the Sm@rt Client app. Here is how to use Sm@rt Client with WinCC Sm@rt Server:
How to activate WinCC Sm@rt Server on a SIMATIC HMI device
To activate WinCC Sm@rt Server on a SIMATIC HMI device, you need to do the following:
sm@rt client app for android
sm@rt client exe file download
sm@rt client wincc runtime advanced
sm@rt client siemens industry support
sm@rt client remote operation and observation
sm@rt client simatic hmi basic panels
sm@rt client export policy check release
sm@rt client industrial ethernet wlan
sm@rt client simatic wincc comfort panels
sm@rt client siemens end user license agreement
sm@rt client hmi systems over wireless
sm@rt client installation dvd or installation
sm@rt client product catalogue industry mall
sm@rt client simatic wincc smartserver option
sm@rt client mobile operation of hmi devices
sm@rt client view only mode or coordinated operation
sm@rt client complete layout of the station device
sm@rt client activation with a single mouse click
sm@rt client data privacy and security practices
sm@rt client no data shared with third parties
sm@rt client no data collected by the app
sm@rt client google play store download link
sm@rt client compatible with simatic hmi systems
sm@rt client latest version update date and features
sm@rt client reviews and ratings from users
sm@rt client how to use guide and tutorial
sm@rt client frequently asked questions and answers
sm@rt client troubleshooting tips and solutions
sm@rt client contact information and support forum
sm@rt client benefits and advantages of using the app
sm@rt client comparison with other remote hmi apps
sm@rt client requirements and specifications for installation
sm@rt client screenshots and videos of the app interface
sm@rt client best practices and tips for optimal performance
sm@rt client feedback and suggestions for improvement
sm@rt client testimonials and case studies from customers
sm@rt client free trial and pricing plans for the app
sm@rt client refund policy and terms of service for the app
sm@rt client news and updates on the app development
sm@rt client features and functions of the app explained
Make sure you have a valid license for WinCC Sm@rt Server. You can purchase it from the Siemens Industry Mall [here].
Install WinCC Sm@rt Server on your SIMATIC HMI device using the TIA Portal software. You can find the instructions [here].
Configure the network settings of your SIMATIC HMI device and enable Industrial Ethernet/WLAN communication. You can find the instructions [here].
Set a password for WinCC Sm@rt Server on your SIMATIC HMI device. You can find the instructions [here].
Restart your SIMATIC HMI device and check if WinCC Sm@rt Server is running. You should see a green icon on the bottom right corner of the display.
How to connect Sm@rt Client to WinCC Sm@rt Server over Industrial Ethernet/WLAN
To connect Sm@rt Client to WinCC Sm@rt Server over Industrial Ethernet/WLAN, you need to do the following:
Make sure your PC or mobile device is connected to the same network as your SIMATIC HMI device.
Launch Sm@rt Client on your PC or mobile device and tap on "Connect".
Enter the IP address or host name of your SIMATIC HMI device and tap on "OK".
Enter the password for WinCC Sm@rt Server and tap on "OK".
You should see the display of your SIMATIC HMI device on your PC or mobile device.
How to operate and observe SIMATIC HMI systems remotely with Sm@rt Client
To operate and observe SIMATIC HMI systems remotely with Sm@rt Client, you can use two modes: view only mode and coordinated operation mode.
In view only mode, you can only see the display of your SIMATIC HMI device, but you cannot interact with it. You can use this mode for monitoring purposes.
In coordinated operation mode, you can interact with the display of your SIMATIC HMI device, as well as switch the right of operation between the operation station and the app. You can use this mode for control purposes.
To switch between view only mode and coordinated operation mode, you need to do the following:
Tap on the menu icon on the top left corner of the app.
Select "Mode" from the menu.
Select either "View only" or "Coordinated operation" from the options.
If you select "Coordinated operation", you will see a lock icon on the top right corner of the app. Tap on it to request or release the right of operation.
Tips and Tricks for Sm@rt Client Users
To make the most out of Sm@rt Client, here are some tips and tricks that you should know:
How to use the device layout and hardware buttons on Sm@rt Client
Sm@rt Client has a device layout feature that allows you to see and use the hardware buttons of your SIMATIC HMI device on your PC or mobile device. This feature is especially useful for SIMATIC HMI Basic Panels 2nd, which have physical keys and LEDs on the device. To use the device layout feature, you need to do the following:
Tap on the menu icon on the top left corner of the app.
Select "Device layout" from the menu.
You will see a graphical representation of your SIMATIC HMI device on your PC or mobile device.
You can use the hardware buttons on the device layout by clicking or tapping on them.
You can also see the status of the LEDs on the device layout by their color and brightness.
How to switch between view only mode and coordinated operation mode
Sm@rt Client has two modes for operating and observing SIMATIC HMI systems: view only mode and coordinated operation mode. In view only mode, you can only see the display of your SIMATIC HMI device, but you cannot interact with it. In coordinated operation mode, you can interact with the display of your SIMATIC HMI device, as well as switch the right of operation between the operation station and the app. To switch between these modes, you need to do the following:
Tap on the menu icon on the top left corner of the app.
Select "Mode" from the menu.
Select either "View only" or "Coordinated operation" from the options.
If you select "Coordinated operation", you will see a lock icon on the top right corner of the app. Tap on it to request or release the right of operation.
How to use the automatic HMI panel detection feature
Sm@rt Client has an automatic HMI panel detection feature that allows you to scan a QR code or a barcode on your SIMATIC HMI device and connect to it automatically. This feature is convenient for finding and connecting to multiple SIMATIC HMI devices in your network. To use this feature, you need to do the following:
Make sure your PC or mobile device has a camera and a microphone.
Tap on the menu icon on the top left corner of the app.
Select "Scan QR code / barcode" from the menu.
Point your camera at the QR code or barcode on your SIMATIC HMI device and wait for it to be recognized.
You will hear a beep sound and see a message confirming that your SIMATIC HMI device has been detected.
Enter the password for WinCC Sm@rt Server and tap on "OK".
You will be connected to your SIMATIC HMI device automatically.
Conclusion and FAQs
In conclusion, Sm@rt Client is a software solution that allows you to remotely operate and observe your SIMATIC HMI systems over Industrial Ethernet/WLAN. You can use Sm@rt Client on your Windows PC or Android smartphone/tablet, and connect it to a WinCC Sm@rt Server that is running on a SIMATIC HMI device. You can use Sm@rt Client in view only mode or coordinated operation mode, depending on your needs. You can also use some features like device layout, hardware buttons, and automatic HMI panel detection to enhance your user experience. Sm@rt Client offers many benefits for SIMATIC HMI users, such as increased flexibility, improved efficiency, enhanced safety, and more.
If you have any questions about Sm@rt Client, you may find the answers in these FAQs:
Q: How many Sm@rt Clients can connect to one WinCC Sm@rt Server at a time?
A: One WinCC Sm@rt Server can support up to four Sm@rt Clients at a time. However, only one Sm@rt Client can have the right of operation at a time.
Q: How secure is Sm@rt Client communication?
A: Sm@rt Client communication is encrypted with SSL/TLS protocol and authenticated with username and password. You can also use VPN or firewall settings to further protect your data.
Q: What are the supported languages for Sm@rt Client?
A: Sm@rt Client supports 12 languages: English, German, French, Italian, Spanish, Portuguese, Russian, Chinese (simplified), Chinese (traditional), Japanese, Korean, and Turkish.
Q: How can I update Sm@rt Client?
A: You can update Sm@rt Client by downloading the latest version from the Siemens website or the Google Play Store. You should also update WinCC Sm@rt Server on your SIMATIC H MI device to match the Sm@rt Client version.
Q: How can I get support for Sm@rt Client?
A: You can get support for Sm@rt Client by contacting the Siemens Technical Support [here]. You can also find more information and documentation about Sm@rt Client on the Siemens website [here].
I hope you enjoyed this article and learned something new about Sm@rt Client. If you have any feedback or suggestions, please let me know in the comments below. Thank you for reading! 44f88ac181
コメント